KEENSERTS® additional information: Edge distance

We would like to inform you of some additional information regarding our KEENSERTS®
 
Boss Diameter: 1.5 x outer diameter of insert.
 
Edge distance to a flat side: Can be as little as 0.8mm over 1/2 outer diameter of the insert. Tap marks may show on the flat side and the insert should be positioned with keys 45°to 90° (2 KEES) offset from the flat side.
 
If you have any questions, please contact us.

More Stories

View by Product

Archive

News Archive


EVERYTHING YOU NEED TO KNOW ABOUT THE NEW EPT1 BATTERY DRIVEN POWER TOOL FOR KEENSERTS® FROM CAMLOC®

Installs metric KEENSERTS® from size M5 to M12 and imperial sizes from 10-32 (10-24) to ½-20 (½-13)Portable tool makes installation easy in any environmentIt is easy to operate due t...

Read more

The New Camloc Retaining Ring for the 50F Quick Release Fastener Series

We have added the easy-to-install 50W17-1BP stainless steel retaining ring to our 50F Series washer range. Simply press the ring onto the stud using the corresponding assembly tool 50T01-1DR.Further i...

Read more

The New KNT Premium Hand Tools for KEENSERTS®

We are excited to launch our new line of hand tools designed specifically for installing KEENSERTS. We developed the new KNT hand tool with the following three requirements in mind: Quick and eas...

Read more

Series VKM921 - Just pull, turn, close and fold the handle!

The VKM921 series is simple to use and provides quick and easy installation without the need for tooling. The VKM921 is captive and does not require a receptacle. When preparing for installation, only...

Read more

The Differences Between D4002 and 4002 Series

The 4002 series is the original series that is used mostly within the aerospace industry. It is a reliable, captive, vibration resistant quarter turn system that has a long life-cycle and can sus...

Read more

Catalogue Updates : Additions to the 991F and 15F series

We have updated our Quarterturn section of our catalogue. We have added two new Quarterturn fasteners, the first being the V15S20; a hidden push-push solution and the second is the 991S04, a plastic h...

Read more

Recoil® Tangless® Inserts - The Next Step in Wire Thread Insert Evolution

Recoil Tangless inserts are designed to offer the same reliable thread strengthening whilst minimizing the risk of losing a ‘tang’ associated with tanged inserts. Generally, wire thread in...

Read more

New plastic receptacles and aluminium shims for D4002 series

Our catalogue now features both new plastic receptacles and aluminium shims to complement our D4002 series.Due to its lightweight material, the Torlon receptacles are ideal for dynamic applications li...

Read more

New variants of the 2812L Slam Latch

As we have already introduced in one of our previous case studies we are now showing several new variants of our 2812L self-locking slam latch variants as standard parts in the our catalogue. You can ...

Read more

Introducing Arconic - Innovation Engineered

Arconic is built on an extraordinary heritage of innovation that began with Alcoa’s founding in 1888. Our businesses have helped shape the aerospace, automotive and building and construction ind...

Read more

5 things to know about installing Camloc receptacles - An alternative way!

Rather than the well-known installation on the backside of a frame, most receptacles can be installed in a cavity on the upper side of the frame as well. Here are five facts we thought you should...

Read more

Our new strike has arrived!

The V951L series offers a variety of draw latches and strikes suitable for different applications and tensile strengths. Now we have released this new strike (Part No. is V51L59-1ASNV) we are pleased ...

Read more

What everybody ought to know about our new lift spring!

Our V951L series latches have been very popular over the years (in fact they still are) and have been designed to provide an adjustable, high-performance method ideal for securing machine and equipmen...

Read more