5 things to know about installing Camloc receptacles - An alternative way!

Rather than the well-known installation on the backside of a frame, most receptacles can be installed in a cavity on the upper side of the frame as well. 

Here are five facts we thought you should know about this alternative way to installing our receptacles:
1. Installing receptacles in this way is especially suitable for thick panels and frames as it reduces the required stud length. This benefits the customer as they are able to use more common lengths as the extra-long studs are not always available.
2. As there is only a blind hole needed with the frame rather than a through hole, this method of installation helps when tightness of the frame is an issue.
3. If there is no space inside the frame to install the receptacle or if there are other factors that prohibit a through hole (this is often the case with electric cabinets) this method of installation comes in handy.
4. This works with most standard rivet-on or screw-on receptacles as seen in our catalogue (Series: 5F, 50F 3700N type, 2600/2700, D4002, 991F).
5. Due to only the rivets or screws holding the receptacle the pull out force of the fastener connection is reduced. The dash length calculation will also be different.
If this alternative way is of interest to you we highly recommend contacting us. Our engineers are happy to assist. Please enquire here.
Más noticias

The Differences Between D4002 and 4002 Series

The 4002 series is the original series that is used mostly within the aerospace industry. It is a reliable, captive, vibration resistant quarter turn system that has a long life-cycle and can sus...

leer más

Catalogue Updates : Additions to the 991F and 15F series

We have updated our Quarterturn section in our catalogue. We have added two new Quarterturn fasteners, the first being the V15S20; a hidden push-push solution and the second is the 991S04, a plastic h...

leer más

Recoil® - Insertos Tangless® sin lengüeta

Los insertos Tangless sin lengüeta de Recoil se han diseñado para ofrecer el mismo reforzamiento fiable de la rosca, minimizando al mismo tiempo el riesgo de pérdida de una "le...

leer más

New variants of the 2812L Slam Latch

As we have already introduced in one of our previous case studies we are now showing several new variants of our 2812L self-locking slam latch variants as standard parts in the our catalogue. You...

leer más

Introducing Arconic - Innovation Engineered

Arconic is built on an extraordinary heritage of innovation that began with Alcoa’s founding in 1888. Our businesses have helped shape the aerospace, automotive and building and construction ind...

leer más

KEENSERTS additional information: Edge distance

We would like to inform you of some additional information regarding our KEENSERTS®. Boss Diameter: 1.5 x outer diameter of insert. Edge distance to a flat side: Can be as little as 0.8m...

leer más

Our new strike has arrived!

The V951L series offers a variety of draw latches and strikes suitable for different applications and tensile strengths. Now we have released this new strike (Part No. is V51L59-1ASNV) we are please...

leer más

What everybody ought to know about our new lift spring!

Our V951L series latches have been very popular over the years (in fact they still are) and have been designed to provide an adjustable, high-performance method ideal for securing machine and equipmen...

leer más